Stamping Automation Metal Sheet Straightening Machine Hardware Auto
Heavy-duty material rack is the most used material for unloading
and unwinding in stamping automation production. It has the
advantages of economical price, simple operation, low failure rate
and high degree of automation. It is the first choice for
discharging equipment in automatic punching production.
The models of heavy-duty material racks are divided according to
the maximum width of the coils that can be placed. There are 14
types of standard MT-200 to MT-1500, each of which has a standard
inner diameter and outer diameter. The basic parameters of diameter
and load capacity.
1. Find out the basic parameters of the material, width, thickness,
weight, inner diameter and outer diameter of the material of the
The heavy material rack is a vertical discharging device. The coil
material is fixed on the expansion and contraction reel of the material rack, so the inner diameter, the outer diameter and the load capacity
are bound to be limited. In many cases, the standard material rack
type is not It must be suitable for customers. At this time, the
manufacturer can be customized according to the actual inner
diameter, outer diameter and load capacity.
It is also necessary to clarify the material and thickness of the
material. When the material has a high hardness and a large
material thickness, a press arm is required to prevent the material
from being affected by the unwinding of the material.
2. Find out the space of the factory and the situation of the
follow-up machine. The heavy-duty material frame has two kinds of
power and power. The unpowered heavy-duty material itself has no
power and is unwinded by the subsequent machine pulling. The
waiting area is relatively short, but there is loss to the
subsequent machine motor.
3. Comprehensive considerations determine whether heavy-duty
material racks need to be equipped with optional inverters, oil
pressure expansion, pressure arm, photoelectric sensing device, and
The photoelectric sensing device is used for replacing the contact
type sensing rod for the material frame to unwind the
non-conductive material, and when the material surface is coated
with the film material, the material frame is controlled to start
and stop; the loading trolley is used for automatic feeding of the
|工作滚轮Work Roll Number(支)||上upper4/下lower3||上upper4/下lower3||上upper4/下lower3||上upper4/下lower3||上upper4/下lower3|
|送料滚轮Feed Roll number(组)||1||1||1||1||1|
|料架电机Reel Mot or(kw)||2.2||2.2||3.7||3.7||3.7|
|使用电源电压Power (V)||三相 3Phase 220V/380V/50HZ|
矫正能力表 Straigtening performance
※The above flgures are the material having yield strength of
245N/mm2 (tensile strength of 392N/mm2).
1. Pre-Sales Service:We have professional designers to meet the
different requirement of our customers.
2. After-Sales service:We have an efficient team to meet 24*7 all
3. Full-Service:Actively cooperate with customers to deal with
problems in equipment using.
4. Engineers can provide service machinery overseas.